Meyle identify water pump failures and causes

May 19, 2025
Meyle identify water pump failures and causes Check the coolant condition on a regular basis and observe the replacement intervals
Share:

Water pump quality depends upon the use of high grade components. These ensure competent repair, and satisfied customers. However, even the best selection of materials cannot prevent premature water pump damage caused by ignoring fitting instructions. In an ongoing dialogue with repair professionals, Meyle specialists identify the external factors primarily responsible for early water pump failure. The following is a continuing description of some more of the typical damage patterns and their causes.


Coolant and antifreeze
Improper use of coolant. The coolant used is not specified for the given engine or the mixing ratio is incorrect. At worst, there is no coolant at all or the water is contaminated. Mixing incompatible coolants results in even greater damage.

Possible Consequences
  • Thermal damage
  • Frost damage
  • Chemical reactions
  • Deposits
  • Corrosion and cavitation damage
Solution
Use the MEYLE coolant and observe the mixing ratio specifications. To maintain optimal coolant performance, use water of drinking quality, preferably distilled water.

Important: Coolants must be treated as heavy metal waste and disposed of accordingly!

Corrosion and cavitation in the cooling system
Insufficient and/or incorrect coolant additives cause corrosion and cavitation in the cooling system, with negative effects on the water pump components and risk of radial seal contamination.

Possible Consequences
  • Leakage
  • Cavitation damage
  • Damage to other cooling system components
Solution
Check the coolant condition on a regular basis and observe the replacement intervals specified by the vehicle manufacturer at all times. Note: Never blend different types of coolant.

Sealants
Cooling system contaminated, owing to incorrect use of silicon sealant.

Possible Consequences
  • Radial seal damage
  • Clogging of the coolant system
Solution
Only use the sealant provided with the MEYLE product, or recommended by the vehicle manufacturer.

Use silicon sealant sparingly and protect the cooling system from sealant ingress.

To read more of this technical article or download the entire article click here.

There are lots more Tech Tips to view, and they are all searchable, on TechTips.ie.

 
Meyle identify water pump failures and causes Use silicon sealant sparingly and protect the cooling system from sealant ingress
MEYLE
PREVIOUS ARTICLE
Bosch stresses importance of regular filter changes
NEXT ARTICLE
OSRAM launches 3-in-1 LED inspection light kit

More from GARAGE WORKSHOP

Ford announces universal EV platform and major investment programme

Ford announces universal EV platform and major investment programme

icon Ford in the USA has announced...
NAPA Auto Parts opens new store in Mullingar

NAPA Auto Parts opens new store in Mullingar

icon NAPA Auto Parts has continued...
New Premier Hand Tool Trays from Sealey

New Premier Hand Tool Trays from Sealey

icon Sealey is encouraging technici...
Bosch spark plugs – the right choice for hybrid models 

Bosch spark plugs – the right choice for hybrid models 

icon Hybrids are now one of the mos...
€6,000 raised in Climb4Cancer

€6,000 raised in Climb4Cancer

icon Earlier this Summer, a dedicat...
Paintless dent removal made easy

Paintless dent removal made easy

icon Paintless dent removal is ofte...

More from AUTOBIZ