An oxy-acetylene torch is often the go to tool for removing rusted and corroded nuts, but when these are in a tight space near a fuel line this is definitely not a safe option. 

Using an open flame in a confined space vastly increases the consequential fire risk, which could mean expensive damage to near-by plastics, wiring, trim, and greatly increases the risk of injury. 

The safer and easier option is to turn to the Mini-Ductor, induction heating tool. This uses high-frequency magnetic fields to quickly heat the ferrous metal to release it from corrosion or thread-lock compound, without the dangers of open flame. The heat is localised on the part and not the surrounding area, which results in less collateral damage as compared to a torch. Another benefit of this localised heat is that parts can be reused, saving time and money.

The Mini-Ductor is a professional, handheld, flameless torch and the ideal tool for commercial garages due to its power source. The models include the Mini-Ductor II, Mini-Ductor Venom and the portable Mini-Ductor 12V, which works off a 12-volt battery pack, or a car, van or truck battery.

The Mini-Ductor II and 12V both feature an inline design which helps reach those tighter areas such as fuel lines. Both tools fasten coils with thumbscrews, have a push-button activation and an LED work light. They also include a one-year manufacturer’s warranty.

The Mini-Ductor Venom features an angled, pistol grip design to better reach tight areas where torches cannot go. The Venom includes trigger activation, a coil Twist-Lock which locks coils into place with one easy turn and a 2-year warranty. The Venom also has a fault monitor LED light to indicate if the tool is working properly.

Each Mini-Ductor kit is supplied with three bendable coils, including a 7/8” pre-formed coil, 23” U-form coil, and 41” bearing buddy. These coils are flexible and able to be bent or separated. The U-form coil and bearing buddy allow the user to wrap the coil to fit any application.

These coils are ideal for getting into awkward areas and thin enough to wrap around the nut and heat it for easy removal. For example, a 19mm nut is heated red hot in seconds. The heat expands the nut and breaks down any corrosion bonds. All coils are coated to eliminate oxidation and resist abrasion if used properly. 

To find out more, call 0044 1953 859138, email info@theinductor.co.uk or visit www.theinductor.co.uk.